LightControl

Rigid endoscope tester

LightControl is an automated, connected rigid endoscope measurement system to verify the quality of rigid endoscopes, enables quality control, predictability and traceability.
Vendor and repair management based on facts.

Set up a meeting
LightControl Scopemount closeup
HubSpot Video

Visual feedback

The image feature shows images made during measurement on the attached display and stores these in the cloud for visual feedback to support evaluation and reporting.
By using the test and measurement details, information about the performance of the endoscopes under test can be monitored to present history and trend analyses.

LightControl stores all details for later use in reports, and in a dedicated management and quality reporting

 

Detailed Reporting

All endoscope measurements and test results are stored in a database for reporting and management purposes.
The reporting engine is designed to build and run reports based on pre-set filters and selections, presenting the details required for dedicated test and measurement reporting.

History and management reports can be generated to secure quality management. Reports can be viewed on your screen or exported to various formats, including API, to be used in documentation.

Further automated processes can easily be set up. For instance, if an endoscope fails, the report is automatically sent to your repair firm via email.

 

Snapshot

Snapshot images are taken during the measurement to present the defects in rod lenses.
This provides additional feedback to the operator and can be used during management reporting.

Snapshots from previous endoscope measurements can be used for specific quality evaluations. For repair and replacement reporting, snapshot provides confirmation about defects and affected quality.

 

LightControl Side For dark background

Quality Assurance and Control

  • Measures and verifies the quality of your rigid endoscopes based on 6 parameters.
  • Traceability, Visbility, Quality assurance and control
  • Regulatory compliance with EU MDR 2017/745
  • Increased patient safety
  • Increase O.R. uptime
  • Operational excellence and cost savings
  • Supplier & repair management & automation
  • Connects data to your systems

Endoscope Testing

Up to 6 automated test and measurement parameters.
Each parameter is designed to verify a specific element and provides detailed feedback on quality and usability.
By using LightControl, endoscopes are tested under the same conditions and preset specifications every time.

 

LF Icon LC page

Lense Fracture measures whether one or more internal lenses have a fracture.

HubSpot Video

 

PD Icon LC page

Particle Detection finds whether particles have entered the internal sections of the endoscope.

HubSpot Video

 

FB - Light fibers

Light fibers are measured in Lux and based on light emission. 

HubSpot Video

 

LT - Light Transmission

Light transmission is measured against its manufacturer's reference value.

HubSpot Video

 

FC - Focus

Focus is measured in relation to a set reference stored in the testing device.

HubSpot Video

 

CC - Colour Correctness

With Colour correction, the deviation is measured in relation to its reference value.

HubSpot Video

 

I'm interested in LightControl